PICTURE ONE!
There is the dinette, looking stunning in aqua and white. That is the original table, a white laminate with flecks of gold in it which works just fine for me. Sitting on top of it is a plant I stole from my fireplace mantle. It only took one camping trip for me to learn that decorative items are just in the way.
Now we have another picture. Tis a picture of the map that I stuck above the window.
Now for the story, and get ready cuz it is fascinating. I found the map for free online. Oh, heck, let me see if I can find it to share with you.
https://mrprintables.com/printable-map-of-the-united-states.html
There you go. I hope you appreciate the lengths I go to. That took me like two minutes. So I printed that out and attached it to a cheap cork board from Walmart. But after one cold night when all the windows were closed and the four of us were breathing all night long (as one does) the paper got all warped from the moisture in the air. So this one is laminated. Printed and laminated at my local print shop for like $5.00 was totally worth it.
Here is a picture of curtains:
I made them out of shower curtains I got at Target. This was probably not the cheapest way to go, but it can get moist in there sometimes (as we learned from my previous story about the map), and I figured shower curtains are made to withstand moisture. Plus, this curtain had a really nice textured pattern, so I just went for it. Curtains aren't that complicated to make, but there are a ton of windows in this tiny trailer and it took FOREVER. The grommets were the easy part. Let me see if I can find them on Joann.com. Hang on.....
Ok Here are the ones I used:
They come with a little template to show you what size to cut your circle. The grommets themselves are plastic, and the front and back just snap together. Zip Zap Zooie.
They are a little pricey though, so use coupons. I bought these in a dozen separate trips to two separate Joann stores. I kept buying all they had, which was maybe just as well so I could get them all for at least 40% off.
Here is a light fixture, which clearly isn't big enough to cover the hole it was installed in.
I also painted the base Antique Brass, so it would match everything else.
We wanted everything to be able to run off batteries, but 12 volt light fixtures don't offer a lot of options. However, you can get 12 volt light bulbs. So this light is a regular fixture with a 12 volt bulb in it. Problem solved.
The following picture illustrates two things.
1) RV light switches are adorable.
2) White walls were a bad idea. I love the look of white. But I have kids. I camp with my kids. And they get DIRTY. And it shows. Everywhere. PROCEED WITH WHITE WITH CAUTION.
And here is the kitchen.
It is painted a different color than the rest of the trailer. A slightly off white beigy gray. I'd love to tell you what the color is called, but I can't remember. But it is a lovely color. I wish I did the whole trailer this color. It is just off white enough to hide a lot of fingerprints. The hole in the cabinet wall there is where the original heater went. Which we got rid of. We'll have to cover that hole at some point before we can count this thing as done.
The tiles for the backsplash we got on Amazon.
I still need to put some kind of trim on each edge of this back splash, but I haven't decided what yet. They are sticky back, so theoretically easy to install, but it was still a fair amount of work. What I should have done was this:
That is a sheet of stainless steel Diamond Quilted. You can buy it online at the link above, or check at some local sheet metal supplier for a better price. I bet they would do it for less than I bought those tiles for, and install would be a snap.
The other thing to note is that in the 1968 Kit Companion, on the face of the cabinetry in front of the sink was just a big blank space. See:
So I found a towel rack that fit in the space, painted it Antique Brass, and voila.
Let's turn around and look at the other wall.
More cabinets. All the cabinet pulls are original. Except I hit them with my trusted Antique Gold Spray Paint. You probably saw that coming, didn't you?
I was gonna put Wallpaper on that wall, but I am too cheap. So I drew it using a gold paint pen.
Behold my mad measuring and marking using a straight edge skills!
Here's some of the original paperwork we found in the trailer, laminated to protect it.
Next we've got the section of the trailer still needing the most work.
The back bench and bunk bed. All these cushions still need to be upholstered. I have the fabric and everything, I just really don't want to do it. The board that makes up the bunk bed also hasn't been painted for some reason. That's another thing that I don't want to do, but I'm going to have to suck it up and paint it eventually.
Also note, this board that goes across the bed cracked and will have to be replaced.
BOO.
The lighting and USB outlet over the back bed:
At some point I just gave up finding light fixtures in gold and spray painted everything. Everything!!
Here is another view of the finished half of the trailer.
And here are more unfinished things.
In the spot where that board sits should be a hatch that opens into the space under the back bench. In case you don't remember, here it is when we bought it.
That door was just particle board covered in sheets of metal. So, what with the weed farm growing in the back of the trailer the door also completely fell apart.
Then there is the hole where the vent for the heater came out.
Another place we handily covered with some wood. Fancy!
Last of all we need to paint.
But that is at the very bottom of the list, for reasons that I hope are obvious. That's all. Thanks for donating your eyeballs to this endeavor. I'm going to have dinner now. Toodles!
